PC7700 Series Double Side UV Curing Systems

The PC7700 double sided UV curing system is designed to expose photoimageable materials to intense UV energy. By producing exactly matched energy above and below the conveyor belt, the machine increases productivity by requiring only one pass through the system relative to single sided UV curing systems. An extra degree of freedom is added to the UV curing process by the Argus patented 'Variwatt' UV control system. This system allows complete adjustment of UV intensity from 50% to 100% power in approximately 1% increments.

An optional water cooling system is available for exposing products that require a low surface temperature be maintained. The water cooling system supplies an IR filter which consumes IR emissions at the source, thereby reducing effective surface temperatures. The filtration system includes a water jacket type arrangement that provides a wall of water surrounded by two walls of quartz glass. The water is cooled in a self contained cooling system and recirculated in a closed loop fashion.

Available Options

Water Cooling System: Provides a means to maintain low surface temperatures during ultraviolet exposure.

Electrical Service Requirements

Circuit Breaker service is 3-phase configuration with a good Ground.

Exhaust System Requirements

Note: Transition and ducting to be supplied by user.

Shipping Data

Note: Crating dimensions and weights are approximate and may vary within 10%. 

Figure: PC7725 Double Sided UV Curing System Machine Dimensions

Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map

Solar Photovoltaic Thin Film | Liquid Photo-Imageable Solder Mask | Hot Air Leveling | Fusing | UV Processing

Copyright © 1997-2012 Argus International, Inc. All rights reserved.