PC7100 Series Single Side UV Curing Systems

The PC7100 single sided UV curing systems are designed to expose photoimageable materials to intense UV energy. The UV energy is provided by employing medium pressure mercury vapor lamps above the conveyor. Lamp intensities of 200 watts per inch and 300 watts per inch are available with 2 or 3 (200WPI only) lamp arrangements. Lamp energy is application dependent, but the standard equipment includes 2 lamps are 200WPI each.

An optional water cooling system is available for exposing products that require a low surface temperature be maintained. The water cooling system supplies an IR filter which consumes IR emissions at the source, thereby reducing effective surface temperatures. The filtration system includes a water jacket type arrangement that provides a wall of water surrounded by two walls of quartz glass. The water is cooled in a self contained cooling system and recirculated in a closed loop fashion. 

Available Options

Water Cooling System: Provides a means to maintain low surface temperatures during ultraviolet exposure.

Conveyor Stop Alarm: Provides an alarm and interlock system to disable all UV sources in the event of conveyor stoppage.

Electrical Service Requirements

Circuit Breaker service is 3-phase configuration with a good Ground.

 Exhaust System Requirements

Main Exhaust

Note: Transition and ducting to be supplied by user.

Shipping Data

Note: Crating dimensions and weights are approximate and may vary within 10%.

PC7125D Physical Dimensions

Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map

Solar Photovoltaic Thin Film | Liquid Photo-Imageable Solder Mask | Hot Air Leveling | Fusing | UV Processing

Copyright © 1997-2010 Argus International, Inc. All rights reserved.