PC6600 Series Solder Stripping Systems

The PC6600 series solder stripping systems are designed to strip plated tin or tin lead printed circuit boards. Using a recirculated chemical spray technique, the panels are exposed to the various chemistries available which will efficiently remove the tin or tin-lead. This system is intended to solder strip, then passivate the surface for future processing but can also be used as a solder strip system only if an exothermic chemistry is used, sump cooling may be a necessary option.

This system is fabricated from PVC construction, but the chemistry should be specified to assure complete compatibility. Other Argus products related to the solder stripping system is the PC6120 Developer/Solder Stripper. This dual purpose machine may be used as an LPISM developer or solder stripping machine if passivation is not required. When used as a solder stripping system, the 6120 has more throughput than the PC6620 because all chambers are devoted to solder stripping.        

Available Options

Sump Heating & Cooling: Provides the ability to heat or cool stripping solutions dependent on the desired application. Some solder stripping solutions are more active when heated, and others produce heat during the stripping process. This option provides ample heating or cooling of the sump chemistry.

Electrical Service Requirements

Circuit Breaker service is 3-phase configuration with a good Ground.

Item

200-240V 50/60Hz

380-415V 50Hz

440-480V 50/60Hz

Power

PC6620 Circuit Breaker

30A

30A

30A

7kVA

 Fresh Water Rinse Requirements

Item

Volume

Connection Fittings

PC6620

4 gallons per minute

2 x 1.25"NPT, PVC

Drainage Requirements

Rinse Drain

Item

Volume

Connection Fittings

PC6620

4 gallons per minute

1 1/2"NPT, PVC

Tank Drain

Item

Volume

Connection Fittings

PC6620

Gravity Feed

1 1/2"NPT, PVC (Tank Valve included)

 Exhaust System Requirements

Main Exhaust

Item

Volume

Ducting Required

PC6620

600CFM

4" PVC Duct, 2 places, 30CFM each

Note: Transition, blower and ducting to be supplied by user. 

Shipping Data

Item

Crate Size

Crated Weight

Air Freight

Common Carrier

PC6620

102" x 63" x 65"

1000 lbs.

1,400 lbs.

Note: Crating dimensions and weights are approximate and may vary within 10%.

PC6620 Physical Dimensions

PC6600 Solder Strippers - HAL Line

PC6600 Solder Strippers - Fusing Line

Printer Formatted Document

Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map

Solar Photovoltaic Thin Film | Liquid Photo-Imageable Solder Mask | Hot Air Leveling | Fusing | UV Processing

Copyright © 1997-2010 Argus International, Inc.  All rights reserved.