PC5500 Series Precleaning Systems

The PC5500 series precleaning systems were designed to precede Argus PC4800 and PC4700 fusing systems as well as the Argus HAL5224 and HAL5124 series Hot Air Solder Leveling system. The machine is designed to provide a vigorous spray cleaning, fresh water rinse and turbo air dry. The importance of starting a process with a clean surface cannot be stressed enough; this system provides excellent board cleanliness prior to fusing and/or HASL processes. To maintain machine cleanliness all controls are mounted on a NEMA rated control console that may be placed up to 10 feet from the machine.

Available Options

Sump Heating: Provides the ability to heat precleaning solutions. Some precleaning solutions are more active when heated; the sump heating option provides excellent control of sump temperature.

Electrical Service Requirements

PC5500 Standard

Circuit Breaker service is 3-phase configuration with a good Ground.

PC5500 with Sump Heating

Circuit Breaker service is 3-phase configuration with a good Ground.

Fresh Water Rinse Requirements

Drainage Requirements

Rinse Drain

Tank Drain

Exhaust System Requirements

Main Exhaust

Note: Transition, blower and ducting to be supplied by user.

Shipping Data

Note: Crating dimensions and weights are approximate and may vary within 10%.

PC5520 Physical Dimensions

PC5530 Physical Dimensions

Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map

Solar Photovoltaic Thin Film | Liquid Photo-Imageable Solder Mask | Hot Air Leveling | Fusing | UV Processing

Copyright © 1997-2010 Argus International, Inc. All rights reserved.